The industrial workbench is suitable for various applications such as mold, fitter, inspection, repair, assembly, etc. The table has been specially treated to have good corrosion resistance, dirt resistance, impact resistance and load bearing capacity.
The workbench can be divided into light, medium, heavy workbench.
There are multiple work desks to choose from, which can be used to meet different usage requirements.
A mounting hole is reserved on the table for the customer to install the power socket.
After installing the tool cabinet, it is more reasonable to use the space and store the protection tools.
A vise can be added directly to the work table.
Accessories such as louver hanging board, square hole hanging board, and lamps can be added to the work table, which has various options to meet customer requirements.
Table top advantage
The workbench countertop is made of high-pressure fiberboard, which makes the countertop more impact resistant.
The special arc table corner is not easily damaged by impact.
The high-strength plastic edging is sturdy, practical, not easily damaged, and is not easy to fall off.
Stainless steel surface characteristics
The table is made of high-pressure composite board, and the surface is covered with 1-2mm sand surface stainless steel plate to achieve beautiful and durable.
High temperature resistance, wear resistance, oil resistance and long service life. It is a multifunctional table.
Suitable for use in general factories, food industry, research laboratories, and electronics factory clean rooms.
Lightweight workbench can support 300kg-500KG
Fire board top characteristics
Lightweight, beautiful, wear-resistant and fireproof.
Laminate top properties
The work table is flat, the deformation is small, the strength is high, and the impact resistance is good.
Workbench structure advantages:
Workbench can be divided into light, medium and heavy workbench.
1. The high-quality steel plate special mold is formed by roller-rolling process, and the surface treatment is carried out by advanced automatic electrostatic spraying process.
2. According to the user's bearing requirements, different styles of table legs can be selected.
3. According to the user's requirements, the table top can be selected from: polymer composite table top, fire board top, stainless steel surface, iron plate synthetic surface, enamel wood table top, oak laminate left side, anti-static table top, electric wood veneer, etc.
4, the table can be equipped with lighting racks, hangers, shelves, square hole hanging boards, louver hanging boards, power outlets, electrical boxes, parts box hanging strips, etc., to meet the different needs of users. A mounting hole is reserved on the table for the customer to install the power socket.
5. Various types of tool cabinets can be selected under the table. After the tool cabinet is installed, the space can be used reasonably and the protection tools can be stored. A vise can be added directly to the work table. Meet the needs of users loading items.
6, all types of work tables are combined design, disassembly and assembly is easy and stable, durable.
Workbench Clean tips
After using the workbench for a period of time, it is inevitable that there will be stains. It is time to clean it. Since it is clean and naturally inseparable from detergents, what are the requirements for the cleaning agent on the workbench?
Like ordinary workbench, it is generally resistant to acid and alkali corrosion, so acid-alkaline cleaners are not available. For example, the detergents and soapy water we usually use have a certain pH, so they are not used.
The correct way is to go to a professional cleaning store to buy a professional neutral detergent. This kind of cleaner not only has an excellent cleaning effect but also is not corrosive to the workbench. It is an ideal choice for cleaning the workbench.
For more introduction about the workbench, please visit the official page of the sanji-first.com.
In the coil processing, due to the deviation of the coil itself or the machine, once the edge of the coil is not aligned, it will cause errors in subsequent processes, resulting in material waste or machine adjustment. In order to reduce the occurrence of such situations, the web guiding system can provide a solution for the edge position control of the coil.
Web control refers to the technical operation that the coils must always be kept neat and consistent during the spraying, printing, punching, laminating, slitting, or other coil winding processes. When processing coils, it is necessary to perform edge guiding timely on the offset coils. This process is called web guiding. The equipment of the whole process constitutes a system. The web guiding system includes a controller, a web guide sensor, an electric drive, and a web guide mechanism.
The web guiding system is a closed-loop controller, which includes the controller, sensor, and web guide mechanism, as the basic complements of the system. First, the sensor detects the edge or of the coil, and the system automatically reads the offset of the actual position and the setting of the coil. Convert the offset into an electrical signal and send it to the controller. After the signal is amplified and calibrated by the controller, it is output to the driver. The linear driver drives the deviation correction mechanism according to the magnitude of the signal, to restore the coil to the set position. The drive signal of the current driver is only proportional to the deviation of the coil, which makes the web guiding system possible to provide precise control for various coils.
When the rolling speed of the material is relatively low, the speed of the motor should be low speed, otherwise, it will easily lead to over-correction. When the rolling speed is relatively high, then the speed of the motor should also be a high-speed correction. Adjust the winding speed of the correction motor through the frequency adjustment. The automatic web guiding can also be operated manually. It has the functions of automatic detection, automatic tracking, automatic correction, etc, which can track and correct the edges of paper, non-woven fabrics, film, aluminum foil, strip steel and other materials to ensure the roll winding and slitting neatly.
The web guiding system has a compact structure, good mechanical rigidity, low inertia, suitable for high-speed and high-precision edge position guiding in the middle of coil processing.
The anchor is widely used for dredging, offshore mooring, fish farm, and yachting operation, with SS316L material option or with H.D.G. finishing for your multi-purposes. You sometimes need to set two anchors in a crowded anchorage, with anchors at the bow and stern of the marine to limit its ability to swing. Two anchors set from the bow at a 60° angle are another good way to improve security against swinging and dragging, and they allow you to shorten the rodes and use less scope. In heavy weather conditions, where one anchor may not have enough holding power, setting a second anchor may be critical to staying put. Remember that as the wind speed doubles the force on the marine (and the ground tackle system) increases by four times.
Choose an anchor that’s the right size for your marine and the locations and weather where you anchor. Take the anchor manufacturer’s suggested sizes into account and consider your marineing style. Do you typically anchor for two hours or for two weeks, in a lake or in the Atlantic Ocean? The recommended anchor sizes from YSmarines will work well for most marineers, under most conditions.
Sizing an anchor for your marine reinforces, with some limits, the “bigger is better” idea. If your engine fails and you are drifting toward a lee shore, having a properly sized anchor ready could save your marine. But raising the anchor by hand, with no electric powered windlass, calls for light and efficient ground tackle (and a strong back).
You have three options: galvanized steel, Grade 316 stainless steel or lightweight aluminum/magnesium. Most marineers choose a galvanized anchor for cost reasons, with the added advantage of having the highest tensile strength. Stainless anchors resemble works of sculpture to dress up the bow of your vessel.
YSmarines is a professional marine anchor supplier and carries superior quality products with fast delivery anywhere in the world, various types including stockless anchor, folding anchor, spek anchor, bruce claw anchor, etc, with professional certification like DNV-GL, BV, ABS, LRS, RINA, IRS, etc.
An anti-static workbench means that static sensitive components need to be operated on this working platform. In order to prevent damage to static sensitive components caused by static electricity to workers, electronic components and tools, etc. The workbench is widely used in electronics factories, laboratories, etc.
The main body of the anti-static workbench is made of wire rod metal material. The overall design layout principle, the height can be adjusted properly, the accessories can be arbitrarily matched, the combination of anti-static workbench can be flexibly adjusted according to different working environments, the cable configuration box is reserved, and several sets of multi-function power sockets are arranged, and the lighting system is configured. It is easy to use, can meet the requirements of customers, and better work together.
Anti-static workbench countertops are generally made of anti-static melamine high-pressure board (commonly known as anti-static voltage film fireproof board) for surface materials and conductive substrates, which has good grounding measures and excellent anti-static performance. The conductive substrate is generally a conductive particle board or a graphite type composite board, so that the table surface has antistatic properties. Static electricity can be directed to the ground through an antistatic ground or ground wire.
Features of the anti-static workbench
1. Anti-static coefficient is 106-109Ω
2. Adjustable wind speed with adjustable air volume air supply system, the advantages are low noise, maintenance-free, and low vibration
3. Wire rod anti-static anyone can design and install, can be designed to any size
4. The workbench has a strong carrying capacity and continuous production of abrasive tools. While ensuring the quality, the cost is reduced and the stock is supplied, which makes the products cost-effective.
5. All parts of the workbench are anti-static, not just anti-static on the countertop, ensuring an anti-static stability period of ten years and permanent anti-static effect.
6. Anti-static performance is stable, the material itself is anti-static, the workbench itself does not generate static electricity, if there is external silence, the workbench has the function of eliminating static electricity.
7. Each component of the workbench is interchangeable. It can produce new production units or assembly lines by adjusting the anti-static workbench components during process changes, product transformation, test instruments, and test tool addition and subtraction.
Sanji-first is a professional anti-static workbench or ESD workbench manufacturer in China. The products have excellent performance, with the most competitive price and advanced design.
Why choose Sanji-first anti-static workbench
1, humanized design, ergonomic principles, comfortable and beautiful, improve production efficiency
2, modular design, a variety of accessories can be arbitrarily combined and interchangeable.
3, standardized design, can customize the products you need according to different requirements.
4, high-quality countertops, use anti-static fireproof board, with double-sided overall anti-static, fireproof, wear-resistant characteristics.
5, the support uses steel structure optimization design and is made of high-quality cold-rolled steel plate, which is durable and durable.
6, the metal surface is pickled and phosphatized, using high-quality anti-static powder high-pressure electrostatic spraying, smooth, beautiful.
7, the overall anti-static, fundamentally eliminate the potential static threat to the product
Web guide system can be widely used in various production processes of steel, corrugated paper, non-woven fabric, textile, printing, labeling, plastic film, building materials, etc. It can ensure continuous, precise control of the edges of the coil materials. Now we introduce useful tips about how to test the web guide system and daily maintenance.
How to test the web guide system
After the web guide system has been installed on the machine:
1. let the machine run first, if there is a deviation, adjust the upper layer of fabric firstly. For example, if it is to the left, it needs to be adjusted to the right. In the same way, if it turns to the right, you must adjust to the left.
2. Before turning on the web guiding machine, make sure that the fabric is aligned.
3. Then turn on the web guide equipment. After identifying the fabric, the probe is aligned with the red dot and the upper line is aligned with the edge. Then tighten the lower screw and the position will be located.
4.After locating the position, press the button of “automatic” mode. If there is an offset, it will all be aligned with the upper line.
5. Each layer is the same, and this layer should also be aligned with the red dot. The lower screw must be loosened firstly, and then the probe can be moved and aligned with the red dot.
6. After aligning the red dot and twist the black screw.
7. Then touch the “automatic” mode. If there is a deviation, the machine will swing and automatically correct it.
8. All the systems keep the "automatic" mode. Now the web guide runs automatically, and the machine will not run off when it starts.
Daily maintenance of the web guide system
Before the web guide system work
1. Check carefully whether the power switch and the indicator light of the web control system are normal.
2. Check whether the electric indicator light is normal and the sensitivity of the electric eye and the motor.
3. Whether the magnetic powder brake can be braked in time.
4. Fill the gear contact position with lubricating oil to maintain the lubrication between the wheels and reduce mechanical wear to ensure the precision of the web guide.
During the work of the web guide system
1. Is there any abnormality in the coordination of the electric eye, the control system, and the motor?
2.Listen to the sound, whether there is noise or excessive noise in the mechanical part.
3.Whether the temperature of the motor is too high.
After the work of the web guide machine
1. Turn off all power sources to prevent the rectifier from being on standby at any time.
2. Close the protective cover of the web guide control device to avoid objects hitting the device or damaging the control panel.
3. Protect the electric eye from damage by external objects.
4. Lubricate the motor bearings and screw rods.
5. Add lubricant to gears and magnetic powder brakes.
For more professional knowledge, please visit the page of web guide articles