Auxiliary Equipment For Rolling Mill

Auxiliary equipment to various machinery and equipment other than rolling mill. It consists of mechanical equipment used to complete a series of auxiliary processing procedures. According to the difference usages, auxiliary equipment can be classified into the flying shear machine, drawing machine, straightening machine, cooling equipment, lifting and transporting equipment, etc. The selection of auxiliary equipment is very important for rolling mill. The equipment should meet the requirements for product production.

Hot Rolling Mill Cooling Bed

The cooling bed is used for the rebar hot rolling mill production line and consists of a mechanical transmission system, a water cooling system, a cold bed work surface, and a fixed bracket. The cooling bed has the advantage of significantly reduce energy consumption and cost and improve the processing performance of metals and alloys. Hot rolling usually uses large ingots, which not only improves the production efficiency but also improves the rolling speed. The output of the cooling bed is 25ton/hour and the final dimension is Φ8-32 deformed steel bars. The Maximum bed load is 40 tons.

Rolling Line Water Cooling System For Steel Bar Production

The water cooling system in steel plants mostly is used in the rolling mill line for steel bar production. Operators can control flow and system cooling by pulsing each spray up to five times per second. Pulsing capability enables operation at lower flow rates without compromising impact, spray angle or drops size. The system will automatically adjust the cooling profiles based on the inputs from the shapemeter. The water cooling system for the rolling mill has modular design that allows for simple maintenance when needed. Typically, these self-cleaning valves require no maintenance for at least five years and are constructed of high quality, stainless steel internal components to ensure accurate, long-lasting performance.

Pickling-Free Rust Remover Machine

The pickling-free rust remover machine mainly is used for rust, polishing, lubrication, etc. The acid-free machine simplifies rust cleaning procedure. It can complete the shelling, rust removal, polishing, lubrication and other tools at a time. The newly wire treated has a longer rust resistance and can be used indoors for more than 6 months. There are various types of pickling and descaling machines, which can handle wires of different diameters: φ2.5mm-4.0mm, Φ5.5mm-8mm, Φ12mm-16mm, Φ16mm-24mm.

For more professional knowledge, please visit on the page of TINVO rolling mill articles