Forged Steel Shafts have many industrial applications such as pump shafts, valve stems, cylinder rods, eye bolts, studs, motor shafts, input/output shafts and rolls.
TINVO manufactures open die forged shafts in an assortment of geometries and a wide range of materials. Forged shafts are used in any application that endures high stress, impact strength, long fatigue life and high temperatures. Forged shafts have economical and quality advantages as opposed to machining shafts from bar stock. A shaft can be forged to near net shape with varying geometries saving on material cost and machining time. Additionally, a shaft forged to near net shape will benefit from the forging process and have a grain flow following the forged configuration of the shaft thereby yielding outstanding grain structure and the best combination of mechanical properties.
Capability:
Max Diameter: 1000 mm
Max Length: 9000 mm
Max Weight: 40 T
Tolerance: 0.01mm
Material:
Carbon Steel: ASTM A105, ASTM A350 LF2 :
ASTM A694 F42/F50/F60/65/F70 S355J2G3
Alloy Steel: F1,F5,F9，F11, 4130, 4140,8620, 20CrMnMo, 42CrMo4,34CrNiMo6, 18CrNiMo7-6 etc.
Stainless Steel: F321，F304,F304L,F316, F316L, F312L,F321, F347, F347H.
Double Stainless Steel: 1.4462, F51, S31803; F60, S32205; F53, S32750
Hastelloy: Inconel 625 & Monel K500
Process:
Raw Material Inspection →Cutting→ Inspection → Preheat → Forging → Heat Treatment → Inspection → Rough Machining → NDT →Testing → Finishing Machining →NDT →Inspection → Packing→ Delivery.
To learn more knowledge professional knowledge, please visit the product page of Mill rolls.
The brief introduction of Dalin mechanical spring starter as below is for your reference.
0 Group System Dalin Hand Crank Inertia Stater
DALIN 0 Group System is consist of several spring starters in parallel through special way, those spring starters can be any 2 or more types from our products. Which can increase the ability of starting the engine. It can be used to those engines whose displacement is up to 50L.
1 Series Dalin Mechanical Starter(4-7.5L)
DALIN 1 Series Inertia Starter, a kind of mechanical spring starter with small displacement. Which applies to 4-7.5L displacement engines, such as CAT C4.4 , Perkins 1104 , Cummins 4B/6B , Weichai WP4/6 , Deutz BF3L913 , Yuchai YC4F/4D.
2 Series Dalin Spring Starter (7.5-11L)
DALIN 2 Series Mechanical Spring Starter, as known as Spring Starter. The application displacement of it is 8-13L, it is available for these engines: Cummins 6C , Cummins QSB7 , John Deer 6068 , Weichai WP10/12 , Deutz BF6M1015 , MWM TBD234 V6/V8/12.
3 Series Dalin Engine Starters (13-16L)
DALIN 3 Series Engine Starters are a kind of Mechanical Spring Starter Which can be used to big displacement engines, the range is 14-30L. Available common engines model:Cummins NT855 , Cummins K19 , Scania DI13 , Vman D30 , Deutz BF12M1015 , Yuchai YC6T , Wudong WD287.
4 Series Dalin Mechanical Starter(10-13L)
Dalin 4 Series mechanical starter is applied to 8-13L displacement engines such as Cummins 6C , Cummins QSB7 , John Deer 6068 , Weichai WP10/12 , Deutz BF6M1015 , MWM TBD234 V6/V8/12. The Spring Starter has the feature of safety, simple and complete structure and maintenance-free with high-quality material, Reasonable design and strict control.
5 Series Dalin Inertia Starter (1-4L)
DALIN 5 Series Inertia Starter is used to common small displacement engines and the application displacement of mechanical starter is 1-7.5L. The following engines are applicable: CAT C4.4 , Perkins 1104 , Cummins 4B/6B , Weichai WP4/6 , Deutz BF3L913 , Yuchai YC4F/4D.
6 Series Dalin Engine Starter(16-30L)
Dalin 6 Series Engine Starter which is one kind of hand crank starters. The mechanical starter can apply to 14-30L displacement engines. For example: Cummins NT855 , Cummins K19 , Scania DI13 , Vman D30 , Deutz BF12M1015 , Yuchai YC6T , Wudong WD287.
W Series Dalin Mechanical Starter(Speicial)
Dalin W Series Mechanical Starter is our special small type engine starter. The spring starter motor can apply to those engines, the space of which is narrow for install, used to some small engines also.
Learn more detail information, please visit the Dalin product page of Mechanical Spring Starter
Tungsten carbide rolls have the characters of high wear resistance, high corrosion resistance and good compressive properties which is an important part of the steel bar and wire rod rolling.
Tungsten carbide roll bushing is primarily applied in high-speed wire production lines, seamless pipe stretch reducing mill, three-dimensional rolls for cold-rolled ribbed steel bar, and composite roll for hot-rolled bar screw thread steel, etc.
The mass diameter ≤480mm, thickness ≤130mm. We have an annual production capacity of 200 tons, which fully meets the steel bar and wire rod manufacturers demand for the tungsten carbide roll rings.
Carbide rings are made of the hardest metal on earth, they are harder than titanium rings and longer than gold rings. This ring is usually used as a seal, disc cone, instrument and so on.
The Facts about The Carbide Ring:
1.Carbide ring is the most wearable ring on earth.
2.tungsten is about 10 times harder than gold, 5 times harder than tool steel, 4 times harder than titanium.
3.Due to its extremely high hardness, tungsten carbide rings can keep their shape and luminescence time for any other ring on the market for a long time.
4.Carbide ring, known as the "permanent polishing ring"
5.Carbide rings do not bend.
Standard includes ISO, GB, ASTM, DIN, JIS. OEM and ODM are available
Application
bar & wire rod mill, hot strip mill, cold strip mill, PC mill, section mill, plate rolling mill, non-ferrous mill, etc.
For more detail information, you can contact TINVO Rolling Mill now.
Tungsten carbide rolls have the characters of high wear resistance, high corrosion resistance and good compressive properties which is an important part of the steel bar and wire rod rolling.
Tungsten carbide roll bushing is primarily applied in high-speed wire production lines, seamless pipe stretch reducing mill, three-dimensional rolls for cold-rolled ribbed steel bar, and composite roll for hot-rolled bar screw thread steel, etc.
The mass diameter ≤480mm, thickness ≤130mm. We have an annual production capacity of 200 tons, which fully meets the steel bar and wire rod manufacturers demand for the tungsten carbide roll rings.
Carbide rings are made of the hardest metal on earth, they are harder than titanium rings and longer than gold rings. This ring is usually used as a seal, disc cone, instrument and so on.
The Facts about The Carbide Ring:
1.Carbide ring is the most wearable ring on earth.
2.tungsten is about 10 times harder than gold, 5 times harder than tool steel, 4 times harder than titanium.
3.Due to its extremely high hardness, tungsten carbide rings can keep their shape and luminescence time for any other ring on the market for a long time.
4.Carbide ring, known as the "permanent polishing ring"
5.Carbide rings do not bend.
Standard includes ISO, GB, ASTM, DIN, JIS. OEM and ODM are available
Application
bar & wire rod mill, hot strip mill, cold strip mill, PC mill, section mill, plate rolling mill, non-ferrous mill, etc.
For more detail information, you can contact TINVO Rolling Mill now.
Tungsten carbide rolls have the characters of high wear resistance, high corrosion resistance and good compressive properties which is an important part of the steel bar and wire rod rolling.
Tungsten carbide roll bushing is primarily applied in high-speed wire production lines, seamless pipe stretch reducing mill, three-dimensional rolls for cold-rolled ribbed steel bar, and composite roll for hot-rolled bar screw thread steel, etc.
The mass diameter ≤480mm, thickness ≤130mm. We have an annual production capacity of 200 tons, which fully meets the steel bar and wire rod manufacturers demand for the tungsten carbide roll rings.
Carbide rings are made of the hardest metal on earth, they are harder than titanium rings and longer than gold rings. This ring is usually used as a seal, disc cone, instrument and so on.
The Facts about The Carbide Ring:
1.Carbide ring is the most wearable ring on earth.
2.tungsten is about 10 times harder than gold, 5 times harder than tool steel, 4 times harder than titanium.
3.Due to its extremely high hardness, tungsten carbide rings can keep their shape and luminescence time for any other ring on the market for a long time.
4.Carbide ring, known as the "permanent polishing ring"
5.Carbide rings do not bend.
Standard includes ISO, GB, ASTM, DIN, JIS. OEM and ODM are available
Application
bar & wire rod mill, hot strip mill, cold strip mill, PC mill, section mill, plate rolling mill, non-ferrous mill, etc.
For more detail information, you can contact TINVO Rolling Mill now.