YSmarines, which is a marine lights supplier, brings the customers world-class fluorescent pendant light for sale, the most competitive price guaranteed.
JCY24-2J, JCY44-2J Type Marine Fluorescent Pendant Light
The marine fluorescent light is a pendant type. It can be widely used for the illumination of water dripping, water spattering, water coagulating place in ships. Fluorescent lamps can be divided into many types in accordance with the local where they used in including pendant light, ceiling light, corner light and other more ones. The fluorescent light is a shockproof type and is equipped with the shock to absorb inside. The lampshade adopts PC, which has the features of non-discolor and fine softness.
Features:
1. The shell adopts the steel plate tensioned.
2. The lamp equipped G13 lamp holder, used for 24V/15W emergency bulb, the edge of lampshade marks the marking remark clear that needs the emergency device when order.
3. The environmental temperature for work is -30℃~+55℃.
Production authentication:
1. Conform to the National Army Standard (GJB 4000-2000 MARINE ELECTRIC NORMS 3 group power system and CB1246-94 MARINE ILLUMINANTE LIGHTS COMMONLY USED NORMS).
JCY23-2, JCY43-2 Type Marine Fluorescent Pendant Light
The marine pendant light is a fluorescent type, applied to the illumination in wet places in deck and sidewalk in ships. The shell adopts a superior quality steel plate tensioned and the lampshade adopts the injection of PC. It has the seal structure with good waterproof function and can be used in kinds of places and bad environment. It is equipped with compensating capacitance inside the lamp, which comes to a good effect of start.
Features:
The marine pendant light is a fluorescent type, applied to the illumination in wet places in deck and sidewalk in ships. The shell adopts a superior quality steel plate tensioned and the lampshade adopts the injection of PC. It has the seal structure with good waterproof function and can be used in kinds of places and bad environment. It is equipped with compensating capacitance inside the lamp, which comes to a good effect of start.
Production authentication:
1. Adopt IEC60092-306-2009 standard.
2. Conform to GRADE ENTRY NORMS FOR STEEL SHIP.
3. Approved by CCS (CHINA Classification Society)
JCY22-2, JCY32-2, JCY42-2 Type Fluorescent Pendant Light
The fluorescent pendant light is applied to the illumination of water dripping, water spattering, water coagulating place in military ship and ship, like the engine room, dry cabin, tunnel, pipeline, etc. It adopts seal structure and has a high waterproof performance with compact structure and delicacy appearance. In order to prevent from electric shocking, lamp internal and external terminals are equipped with tag. The lamp is equipped B15 lamp holder, used for 24V/15W emergency bulb.
Features:
1. The shell adopts a good quality steel plate tensioned, lamp shade adopts injection of PC, and it has the seal structure.
2. Plug-in type lamp holder, equipped wiring terminal inside, convenient to connect.
3. The edge of lamp shade marks the marking remark clear that needs the emergency device when order.
4. Equipped compensating capacitance inside the lamp, also it has a good effect of start.
Production authentication:
1. Adopt IEC60092-306-2009 standard.
2. Conform to GRADE ENTRY NORMS FOR STEEL SHIP.
YSmarines has years of experience in production and supply of marine fluorescent pendant light and can provide fluorescent pendant light with high standard materials and reasonable price.
Refining and reusing used motor oil is more preferable than processing, and it can bring huge environmental benefits. The recovered waste engine oil can be re-refined into new oil, processed into fuel oil, and used as raw materials in the petroleum industry.
If used oils (such as engine oil, hydraulic oil, and gear oil) from automobiles, bicycles, or lawn mowers are not properly recycled or disposed of, they may pollute the environment. Waste oil must be properly managed by the local waste management department or car repair shop to prevent environmental pollution. There is a similar waste problem with the second mobile phone oil filter. If drained properly, they can be safely recycled or disposed of.
Many reasons for the reuse and recycling of used oil include:
Recycling used oil prevents it from contaminating soil and water.
Oil does not wear out, it only gets dirty, so recycling can save valuable resources.
It takes less energy to produce a gallon of refined base oil than crude base oil.
One gallon of used engine oil provides the same 2.5 quart of lubricant as 42 gallons of crude oil.
Waste oil can be re-refined into lubricants, processed into fuel oil, and used as raw materials in the refining and petrochemical industries. In addition, used oil filters contain reusable scrap metal that can be used as waste by steel producers.
What is Professional Oil Refining Equipment
Now that you understand the differences between oil recycling and oil refining and the benefits of waste oil refining. You must curious about what the professional oil refining plant is. First, we will introduce to you the manufacturers of specialized waste oil refining equipment. Yangjiang is one of the most famous producers of oil refining plant in Chongqing, located in the Jiulongpo District of Chongqing. Yangjiang has its own research and development team to research and produce different types of oil refining machines. Yangjiang produces different oil refining machines, such as lube oil re-refining plant, engine oil refinery, waste oil re-refining plant and so on. Different types of oil refineries can process different types of waste oil. Yangjiang produces equipment refining waste oil with high efficiency and low refining cost. In addition, yangjiang also has its own factory to produce products developed by the independent research and development team, and the product quality is trustworthy.
Secondly, yangjiang produces a variety of oil refining machines that have many advantages, worthy of consumer trust. The first point is that the refining equipment is easy to operate and the operation cost is low, so it only needs one or two workers to operate the large oil refining equipment perfectly. The second point is environmental protection, without secondary pollution. The machine recycles spent gasoline, diesel, engine oil, rubber oil and other lubricants for clean, reusable oil. The third point is that the oil recovered by the oil refiner is a high-quality product without any discoloration caused by oxidation or any bad smell.
We have introduced a lot of details about the oil refining machine, if you have any questions, please feel free to contact us. For more details, please visit the Yangjiang website. www.oilrecyclingplant.com
In daily life, tens of thousands of waste oils are constantly produced every day. This waste oil needs to be treated before it can be used in cars again. This not only protects the environment, but also saves costs. So now we all know that there are several ways to recover used oil. The first is an oil recycling method, which uses oil recycling plant to process waste oil to obtain a clean base oil. The second method is the oil refining method, that is, using oil refining equipment to perform a series of treatments on waste oil to obtain a base oil that can be reused. In addition, some refining equipment also has re-refining technology, so that the quality of the recovered oil is better and meets the use standards. So what is the main difference between oil recycling and oil refining?
Oil Refinery – The Removal of Soluble and Insoluble Impurities
Unlike recycled oil, where only soluble impurities such as heavy metals and dirt are removed. The oil refining system includes extensive processing, filtration, distillation and dehydration to remove both soluble and insoluble contaminants.
When the workers are finishing used oil refining process, additives are removed through chemical processing, which creates an un-additized base oil that can then be distilled to remove any remaining water or additional impurities. A dehydrating process removes residual light fuel, ethylene glycol, and a vacuum distillation step removes the fraction of oil suitable for reuse as lubricating oil. This fraction of oil undergoes hydro treating that further removes remaining polymers and chemicals.
Because re-refined oil goes through the same oil refining and distillation process as the crude oil that later becomes virgin, it can be as high of quality if not higher than virgin. Re-refining waste oil is environmentally friendly and requires significantly less energy to produce than virgin. Re-refined motor oils can be refined again and again, keeping them in circulation versus becoming waste products.
We have introduced a lot of details about the oil refining machine, if you have any questions, please feel free to contact us. For more details, please visit the Yangjiang website. www.oilrecyclingplant.com
There are different types of waste oil, and the general consumer may think that one oil distillation plant can only handle one type of waste oil accordingly. But what I want to tell you is that a kind of oil distillation machine is not only able to handle only one kind of waste oil. It is possible that the scope of use of oil distillation equipment produced by other oil distillation equipment manufacturers is very limited. However, the oil distillation equipment produced by Yangjiang can handle many types of waste oil. The types of waste oil include waste lubricating oil, waste engine oil, pyrolysis oil, and tire pyrolysis oil. Buying an oil distillation device can handle multiple varieties of oil, which saves the purchase cost of the machine.
Working principle of oil distillation machine
After years of unremitting efforts by the R & D team, Yangjiang has already possessed a complete and mature waste oil distillation technology. Vacuum distillation is the core waste oil regeneration technology. The regeneration and reduction system produced by Yangjiang uses batch processing to treat pretreated waste oil, that is, by natural sedimentation, or by using centrifuges to remove water and magazines. After entering the catalyst reaction tank, stir the reaction thoroughly. The fully reacted waste oil is pumped into a distillation kettle, and the waste engine oil is heated under vacuum. As the temperature rises, the oil and gas of different components will evaporate. After cooling, the corresponding fuel oil, light base oil and heavy base oil can be obtained. The liquefiable part can be reused. The non-liquefiable part enters the heating system for combustion through the gas system without wasting any resources.
The light oil processed by the waste oil distillation machine can be added to tractors, ships and generators for reuse. Heavy oils also have different uses. Both the light base oil and heavy base oil produced meet the reuse standards. The gas is burned, and the solid obtained after the distillation is asphalt, which can be used for paving roads, waterproofing buildings, and so on.
We have introduced a lot of details about the oil distillation machine, if you have any questions, please feel free to contact us. For more details, please visit the Yangjiang website. www.oilrecyclingplant.com
What to do before disposing of used oil
Waste oil comes from different places, such as 4s shops, car repair shops and so on. Accumulating waste oil little by little will get a lot of waste oil. If it is discarded or burned, it will cause irreversible harm to the environment. And if the waste oil distillation machine is used to recycle the waste oil, the cost of oil will be saved, and the recovered waste oil can be used again.
Before using a waste oil distillation plant to treat waste oil, it is necessary to treat the waste oil first. Because waste oil contains a large number of mechanical impurities, heavy metals, colloids, moisture, metal ions and other impurities, in traditional kettle distillation or new tube distillation, tower distillation, thin film distillation, and even molecular distillation, heat exchange It is very easy to form heavy oil coking and fouling on pipes and pipe walls such as heat sinks, and the uneven heat conduction and heating also exacerbate the formation of coking and plugging. Affected the quality of line oil, the shutdown caused the production progress and increased the cost of maintenance. Then at this time, it is necessary to add a pretreatment agent for the distillation of waste oil to the waste oil.
The oil additives that need to be used before using the oil distillation unit are generally: flocculant and decolorant.
The role of flocculants is: settling mechanical impurities, heavy metals, colloids, water, metal ions, etc. in the oil, preventing coking and scaling in the subsequent distillation process, uneven heat conduction and uneven heating will exacerbate coking and block pipes. The formation and the impact on the quality of line oil, further causing the shutdown of the furnace affects the production schedule, increasing the cost of maintenance.
The role of decoloring and deodorizing agents: oil contains sulfur, nitrogen, heavy metals, oxides, phosphorus, chlorine and other impurity atoms, which will cause oils containing hydrocarbons to show different colors and affect the stability of the oil.
Recommended oil distillation machine brands
In China, there are countless manufacturers of oil distillation equipment, and in Chongqing alone, there are more than 100 of the more famous manufacturers of waste oil distillation units. Whether it is buying large machinery or small equipment, low prices and high production efficiency are the most valued quality for customers. And Yangjiang can perfectly meet these requirements. Yangjiang Machinery Manufacturing Co., Ltd. is one of the more famous manufacturers of oil distillation machines. It is located in Chongqing Heavy Industry Production Zone, that is Jiulongpo District. Yangjiang has an excellent professional independent research and development team to design and manufacture oil distillation units. In addition, Yangjiang also has its own manufacturing plant to produce oil distillation machines. The oil distillation equipment is a factory direct sale, the quality is guaranteed and the price is low, which is worth buying by consumers.
We have introduced a lot of details about the oil distillation machine, if you have any questions, please feel free to contact us. For more details, please visit the Yangjiang website. www.oilrecyclingplant.com