Coil materials refer to long-sized continuous materials such as paper, film, sheet, non-woven fabric, metal foil, silk, thread, etc. In the process of uncoiling, technological processing, winding, etc, deviation of the coil materials may occur, due to the deviation of the coil itself or the processing machine. The W500 all-in-one web guiding system provides a solution to reduce the occurrence of such situations. The system always tracks the position of the coil material during the production and makes corrections in real-time.
Working Principle Of W500 All-in-one Web Guiding System
The web guiding system is a closed-loop controller. First, the sensor detects the edge or line of the coil, and the system automatically reads the deviation of the actual position and setting the position of the coil and converts the offset into an electrical signal. They send the signal to the controller. After that the signal is calibrated by the controller, it is outputted to the linear driver. The linear driver drives the deviation correction according to the magnitude of the signal. Then the guide mechanism adjusts the coil to the set position. The drive signal of the current drive is only proportional to the deviation of the coil, which makes it possible to provide precise control for various coils.
Features Of W500 All-in-one Web Guiding System
1. Support three working methods of line tracking, edge tracking, centering tracking, etc
2. Support photoelectric sensor, ultrasonic sensor, CCD sensor.
3. Automatic detection of sensor parameters, no need to calibrate the sensor in most environments.
4. Automatic stroke measurement without mechanical limit switch.
5. Ultra-high-speed response with 500 microseconds (0.5 milliseconds)
6. The DC servo motor drives the ball screw
7. Support Simplified Chinese/Traditional Chinese/English
8. The humanized operation, quick and easy working
There are many different types of marine seats to choose from and selecting the right marine seat is very important.
Flip-Flop Seats
These types of seats are what you typically see on fishing marines, bass marines, as well as recreational marines. Their reasonably comfortable since they have cushioning found in both the seat and the backrest. Some come with a storage area underneath and could be insulated to carry ice to help keep things cold.
Bucket Seats
These seats are rounded or contoured and made to fit just one person. They could also be used as a captain’s chair. Bucket seats are also considered to be very comfortable seats and made out of a marine-grade vinyl that will help protect them from the sun and make them resistant to salt and mildew.
Marine Passenger Seats
Marine passenger seats and chairs can be used on the fast ferry, high-speed passenger ship, cruise ship, catamaran, crew boat, cargo ship, the sightseeing boat, traffic boat, pilot launch, yacht and other passenger vessels. The material of the seats adopts fire-proof leather, PU/PVC leather or fabric according to the customer's requirements. The anti-corrosion aluminum structure is durable. It can be made in various seating configurations such as single-seat, double seat, triple seat. Back cushion with high resilience and the flame-retardant sponge is made by adopting a low-temperature foam molding technique. They all have beautiful appearance and special design which makes people more comfortable when seating. The design of the chair is totally in accordance with the ISO standard, IMO standard, and kinds of Classification Society's requirements.
Pontoon marine Seats
Pontoon marine seats are very comfortable and very long. They are built to fit multiple people at once, and they usually wrap around the marine to maximize the number of people it can hold. These seats are hinged to reveal the hidden storage space underneath.
Lounge Seats
Marine Captains Seats
The marine captains seats have 1.2m sliding rail, steel column and pneumatic lifting. And the rail length could be customized. They have modern designs that are easy and comfortable to use fixed type. They have height adjustment with a sealed gas-powered cylinder. They are waterproof, moisture-proof function, surface a layer of fire prevention function. The customer can choose the material is genuine leather or artificial leather. The overall strength of the captains chair meets "International HSC norms" requirements. The seat, backrest and armrests are upholstered in black leather. The seatback angle can also be adjusted from the sitting position. Armrests have a height adjustment feature and tip up facility, making it easy to exit the seat from the side in restricted spaces.
Among the web guide machines, Arise web guide system for the mask machine is easy to operate and install. With the system, the maximum speed of mask machine can reach 500 pieces/minute, and the maximum speed of N95 (KN95) mask machine can reach 3000 pieces/minute.
Applications For Various Industries Of Arise Web Guide System
Printing industry
Solvent-free laminating machine, bag making machine, inspection machine, labeling machine, etc.
Battery industry
Lithium laminator, lithium slitting machine, lithium coating machine, battery stacking machine, etc.
Film industry
Film blowing machine, coating machine, film splitting machine, film casting machine, etc.
Tire industry
Steel wire fiber flattener, tyre building machine, steel cord cutting machine production line, etc.
Advantages Of Arise Web Guide System
1. Aluminum alloy body
2. High precision
3. Low noise
4. Automatic web guide control system
5. Easy to install and operate
6. Professional certificated
How To Test The Arise Web Guide System
All the machines here have been installed web guide, and we don’t turn on the machine. First press the manual mode or center button. This is manual mode. This is the center button. They have the same effect. Let the machine start. If there is a deviation, adjust the upper layer of fabric then. For example, if the deviation is to the left, it needs to be adjusted to the right. In the same way, if the deviation is to the right, you must adjust to the left. Before turning on the correction, make sure that the fabric is aligned, and open the correction device after this. After adjusting the fabric, the probe is aligned with the red dot and the upper line is aligned with the edge of the fabric. Then tighten the lower screw and we will locate it.
After setting the position, turn on the automatic key. Now it is in an automatic state. If there is an offset, it will all be aligned with the upper line, and it will all be corrected gradually. Every layer is the same, and probe in this layer should also be aligned with the red dot. The lower screw must be loosened firstly, and then the probe can be moved and aligned with the red dot. After this step, we set it in place and twist the black screw. Then turn on the automatic button. If there is a deviation, the corrector will swing and automatically correct it too. The one in the lower layer is the same, when the adjustment is done, we don’t need to operate it. After finishing these procedures, turn on all the machines in the automatic state. Now all of them run automatically, without deviation.
For more useful tips, please visit the article page on the test and operation of the web guide system.
Comfort and fit are two important aspects of boat seating. There are many different styles and levels of comfort to choose from, similar to how there are many different styles of couches or recliners you can buy for your living room at home. Selecting the right marine seat depends on you and your level of comfort as well as the style that you are looking for. YSmarines can supply a wide range of marine seats with great comforts and the best suitability. The seats can be widely used for larger boats and smaller vessels. The seats come in various trims and can be tailored to the requirements of the customers.
Bench Seats
These seats are longer and built for more than one person at a time. Bench seats come in a variety of sizes, usually somewhere from 28 inches in length to 65 inches in length. They are closer to a love-seat or couch, like what you would find in your home. There’s no armrest between each other, and you could also lay down on them. Bench seats are very comfortable. You would typically find these seats on pontoon marines and cruisers. Storage could also be found in the base located below the seat cushions.
Swivel Seats
This type of seat is typically found on fishing marines, so it makes it easier for the fisherman to move around while fishing. They are usually a smaller type of seat with a lower backing, although you can spend some extra money to get a higher back, as well as some armrests. There are a few benefits to using a swivel seat such as they could be removed, spin 360 degrees, they’re self-lubricating with non-corrosive poly swivel bearings, and they can fit most standard seat holes patterns.
Captain’s Chairs
There are many different types of marine captains chairs to choose from, and they range widely in quality. Prepare to spend at least a couple hundred dollars and up. They could even run you into the thousands for a top of the line captain’s seat. Captain’s chairs are similar to bucket seats but tend to have armrests and can be adjustable to fit the captain of the marine. With special manufacturing, it is suitable for all kinds of luxury passenger ships, yachts, and so on. The seat can move on the double-sliding rail. The backrest of the seat is angle-adjustable. The armrest can be adjusted and foldable. The height of the seat can be adjusted freely. There is a seat security locking handle to ensure safety.
Leaning Posts
These seats are typically used on center consul marines as well as bass marines. Leaning post seats can come with or without a backrest, and if it comes with the backrest, then the backrest would also be removable. You can use them as a leaning post, a seat, or a bench. There’s usually a foot rail and handrail that goes around. Most leaning post seats also have four holes at the back for your fishing rods to sit in.
Mask machine is a multi-layer non-woven cloth through hot pressing, folding forming, ultrasonic welding, waste removal, ear and nose welding procedures to produce a variety of masks with certain filtration performance. In the production of masks, multiple layers of materials should be neatly fitted together, otherwise, there will be waste products or even stuck machines. The all-in-one web guiding system manufactured by Arise can realize multi-layer material alignment, double the speed, free of waste in the refueling process, and no machine sticking.
What Is The Web Guiding System
The web guiding is a system that controls the position deviation of the coil material in the production line when it is conveyed. The machine has the functions of automatic detection, automatic tracking, and automatic adjustment. It can track and control the marking lines, edges of the paper, film adhesive tape, aluminum foil and other materials to ensure the neatness of winding and slitting.
The Arise web guiding system can achieve multi-layer material alignment. The guiding system is a controller for tracking the edge position of the working material or printing lines for high-accuracy differential and swing. It is composed of industrial integrated circuits and has the advantages of strong anti-interference ability in a harsh working environment, high reliability, and long service life.
Advantages Of The Web Guiding System
One-piece design: tightly sealed, compact;
Brushless servo motor drive, maintenance-free
Precision ball screw, accurate positioning
Beautiful appearance: aluminum alloy finishing, surface sandblasting oxidation
Flexible installation: can be integrated, separated and installed, can be installed at any angle
How The Web Guiding System Work
The equipment guides the sensor to emit infrared or ultrasonic to monitor the operation of the coil and send a signal to the controller. After the controller finds that the web has a positional deviation, according to the command preset by the controller, controlling the drive system to swing to correct the web position.
The web guide control system is composed of a controller, a web guide sensor, an electric drive, and a web guide mechanism. These four components together form a closed-loop control system. The sensor detects the edge position of the coil, reading the deviation between the actual position and the set position, converting this deviation into a voltage signal proportional to it, and then sends this signal to the controller. After the signal is amplified and calibrated by the controller, the signal is output to the electric driver which drives the web guide mechanism to perform actions, according to the magnitude of the input signal, to guide the coil to a preset position.
For more professional knowledge, please visit the article pages of the web guiding system