Carbide rods have characters of high hardness, high strength, chemical stability, electric and heat-conducting and the products manufactured by XYMJ bring superior cemented carbide grades and dimensional precision, which provides excellent features and advantages to meet high demands for machining, with secured consistency, high performance and reliability.
Tungsten Carbide Strips
The main composition of tungsten carbide strips is tungsten powders and cobalt powders. Carbide strips have many excellent characteristics such as high hardness and strength, good wear and corrosion resistance and very stability under high temperature. It can be used in many fields such as woodworking, machining of refractory alloys, stainless steel, high manganese steel, for processing cast iron, non-ferrous metal and aluminum section bar, etc. The product meets the ISO9001:2015 quality standard. XYMJ supplies various types including Carbide Strips with more than 300mm, carbide strips with angle, STB Blanks with US Standard, Strobe Blanks for Circular saws and so on.
Tungsten Carbide Rod
Cemented carbide rods can be used for making end mills, various drill bits, automobile special cutter, engine special cutters, horology, processing special cutters, integral vertical milling cutter, graver and etc. Also, the tungsten carbide rod can be made into hard alloy punches, mandrels, centers, and perforation tools.
(1) Good wear resistance, higher toughness, high precision, better deformation and fracture resistance
(2) Advanced automatic extrusion equipment to produce
(3) HIP sintering and precision grinding to ensure have good performance
(4) Both blank and finished conditions available
(5) Can reach a mirror effect surface after accurate grinding and polishing
Tungsten Carbide Plate
Carbide plate has high hardness, good abrasion resistance and toughness, heat and corrosion resistance. It is widely used in the following fields:
1. The production of cast iron rolls and high chrome roll knife.
2. Suitable for the production of discharge plate, stamping die, cold punching die, such as electronic stamping die.
3. Used in the production of copper, aluminum, stainless steel, cold-rolled sheet, El board, Q195, SPCC, silicon steel plate, metal, standard parts, upper and lower punch and another high-speed mold.
4. Higher wear resistance, suitable for hardwood, logs, aluminum, copper rods, cast iron processing for the production of various types of motors, electronic into the mold, stamping electronic mold.
Tungsten Carbide Rod With Coolant Hole
Carbide rods or round bars with coolant holes for milling have various dimensions, blanks or finished, and many different grades with different applications for customers' selections.
(1) Good wear resistance, higher toughness, high precision, better deformation and fracture resistance
(2) Advanced automatic extrusion equipment to produce
(3) HIP sintering and precision grinding to ensure have good performance
(4) Both blank and finished conditions available
(5) Can reach a mirror effect surface after accurate grinding and polishing
XYMJ has a professional production line with strict quality for tungsten carbide rods and puts emphasis on every production process of our carbide rods. Having premium quality carbide rods is the base of furtherly machined high precision finished carbide parts. We have high-precision grind machines, skilled workers to control the very high precision of each carbide part.
Whether the web tension control is stable will directly affect the quality of the product. If the tension is insufficient, the coil materials will drift during operation, and the finished paper will be wrinkled after slitting and rewinding. Web tension controller refers to the instrument which can permanently control the tension of the coil materials when conveyed on the machine. This controller must be effective for any speed of the machine, including machine acceleration, deceleration and uniform speed, even in the case of an emergency stop. It should also be able to ensure that the slit is not damaged.
Why Choose Web Tension Controller?
In many industries, winding control problems are often encountered. For example, in the production process of coil materials, the unwinding and winding tension of the coil materials is very important to the quality of the product. For this reason, constant tension control is required. That is to make the product receive good tension during the winding process and keep it unchanged from beginning to end. The stability of the tension control is directly related to the quality of the slitting product. If the tension is too large, it will cause the tensile deformation of the processed material, if the tension is too small, the stress between the layers of the coiled material will be deformed, resulting in uneven winding and affecting the processing quality.
How Does The Web Tension Controller Work?
The tension controller is a kind of equipment that can permanently control the tension of the material belt when it is transported on the equipment. Using this equipment can well maintain the operating speed of the machine, and can not affect production in an emergency. So, how does this device work?
The web tension controller mainly works through the coil. Coil magnetostatic powder clutch and magnetic powder brake are automatic devices that can control the input current and change the output. When the coil is not energized, the input shaft rotates, the magnetic powder is pressed on the inner wall of the clamp ring under the action of centrifugal force, and the output shaft does not contact the input shaft. At this time, it is in an idle state. When the coil is energized, the magnetic powder generates a magnetic link under the action of the magnetic lines of force, so that the output shaft and the input shaft become rigid bodies and rotate, and slippage occurs when overloaded. So as to achieve the purpose of transmitting torque.
Methods Of The Web Tension Control
1. Manual Control
Constantly adjust the torque of the clutch or brake during rewinding, discharging or the process to obtain the required tension, which requires the user to check the tension of the coil materials at any time and adjust the output torque at any time. If pneumatic is used for brakes or clutches, the manual tension controller can directly select precision pressure regulators, which can save a certain amount of equipment costs, but it is only suitable for some low-speed compound machines, extruders, textile machinery and other occasions where tension control requirements are not high.
2. Semi-automatic Method
The method adopts the ultrasonic principle to automatically detect the coil diameter for adjusting the tension of the coils. The tension controller is essentially a semi-closed loop system. It can not only automatically measure the coil and control the torque output, but also has the functions of buffer start, anti-loosening and inertia compensation. The implementation cost of this scheme is low, so the method is widely used in mid-range machinery.
3. Fully automatic Method
This method is to measure the tension of the coil by a web tension sensor, and then the controller automatically adjusts the clutch or brake to control the tension of the coils. This method is a fully closed-loop tension control. In principle, this solution can reflect the change of tension in real-time, so the control accuracy is the highest. Therefore, some high-end finishing mills, high-speed slitting machines and other metallurgical applications adopt fully automatic tension controller.
Fully Automatic T500/T1000 Web Tension Controller
T500/T1000 web tension controller is manufactured by Arise Technology which is specialized in research and development, production and sale of web guiding products & accessories such as web guide sensor, web guide controller, web guide actuator, etc with advanced photoelectric, CCD, color sensitivity and ultrasonic technology. The fully automatic T500/T1000 controller provides high accurate tension control with simple & stable operation, easy installation.
Good marine seats should be assembled with corrosion-resistant materials. If you can’t go a whole day on the boat without your back aching, it’s probably time to upgrade those marine seats.
Boaters and anglers are prone to back pain because they sit for prolonged periods of time. While many anglers tend to just deal with the pain, it’s important to note that poor posture can lead to chronic back pain. If you’re already suffering from chronic back pain, spend a few extra dollars to get a seat that provides comfort and back support. Updating your ship with some fresh, new seats can be an exciting purchase. While there are many things to consider, knowing style, quality, and comfort factors will get you started in the right direction.
All marine seats from YSmarines have met ABYC standards making them not only durable but safe for the people sitting in them, widely used on the fast ferry, high-speed passenger ship, cruise ship, catamaran, crew boat, cargo ship, sightseeing boat, traffic boat, pilot launch, yacht and other passenger vessels, with anti-corrosion aluminum structure. The seat can move on the double-sliding rail. The backrest of the seat is angle-adjustable. The armrest can be adjusted and foldable. The height of the seat can be adjusted freely.
Characteristics
1. Ergonomic design;
2. Adjustable backrest and headrest;
3. The seat height may be angle adjusted;
4. Seats can be moved back and forth;
5.Folding / angle-adjustable comfortable seat armrest;
6. The seat can rotate 360 degrees, multi-point positioning;
7.Foot pedal height-adjustable / folding;
8. The column can be vertically lifting.
Materials
1. Chair surface is leather or fabric flame retardant;
2. Back for high-density polyester one-time forming high cold foam spring backfire sponge;
3. For high-density polyester one-time forming high cold foam cushion spring backfire sponge;
4.Seat beams, chair foot, armrest for high strength aluminum alloy 6063 oxides;
5.Rail for high strength aluminum alloy 6061 oxides;
6.Adornment to beams and railhead for PVC plastic resin materials;
7.Rail decoration layering for environmental protection rubber material;
Functions
1. The upper part of the seat can be moved back and forth of 120mm, height adjustment 60mm, seat inclination angle range of ±12°;
2.Seat backrest with adjustable angle of 85°-150°, the headrest adjusted up and down 50mm, handrest multi-point positioning control;
3.The seat of pneumatic lifting regulating range 0-150mm；
4. The seat can rotate 360°and locked 4-point positioning control;
5. Seat pedal can rotate 90° and regression, upper and lower position adjusting range of 0-50mm;
6. The seat can bear more than 150FT.LB torsion reached AD grade standard.
YSmarines is a professional marine and offshore equipment manufacturer in China, specializing in providing boat seats for sale with the most competitive prices and good after-sale services.
Tungsten carbide has excellent hardness, wear&corrosion resistance, resistance, which increase the service life. Tungsten carbide can improve productivity through high performance and reduced downtime. The carbide dies from XYMJ can reach tolerances with +0.01mm. Moreover, the inner hole surface and outside surface can be processed with mirror surface grinding.
Tungsten Carbide Punching Dies
Tungsten carbide punches will increase productivity by reducing replacement tooling cost and downtime. Punches manufactured in carbide can improve the quality of your product and extend the life of your tooling.
Tungsten carbide punches are mounted on metal parts stamping die, used in direct contact the material, and make the material informed, cut. It is a necessary accessory to stamping die. Tungsten carbide punch is depending on the punching material and thickness, to select a different alloy. Under normal circumstances, be thicker stamping products, tungsten carbide is better to choose the lower hardness and toughness of the model; the harder the material, select a slightly lower hardness model, which can effectively avoid the washed missing. When stamping relatively thin sheet metal, or hardness is not high, and hole machining of this product, tungsten steel punch can select higher hardness, thereby increasing the life of tungsten carbide punch. Carbide punches, according to the different needs of the product, to produce different shapes, for example, a batch of drilling, the computer's chassis, there are a lot of top vents, as well as mobile phones, many of the electrical appliances, machinery the hole machining.
Features
1.Well abrasion Resistance.
2. High Hardness, around 88HRA or even 91HRA.
3. Excellent corrosion Resistance.
4. High precision and high quality, the service life is over 10 times longer than common high-speed steel.
5. Mainly used for piercing by machinery manufacture &?hardware, the finished holes are free of burrs and own precise size.
6. Outside diameter, inner diameter, height are all accurate grinding, tolerance can be +0.01mm. The product has very good concentricity, parallelism, perpendicularity.
7. Punches manufactured in carbide can improve the quality of your product and extend the life of your tooling. Working with you, to supply you with carbide components for your Die Set Assembly.
Tungsten Carbide Wire Drawing Die
Wire drawing dies are usually used to shorten the diameter of various ferrous and non-ferrous metal rods and wires. Applications include various grades of low/medium/high carbon steel, steel alloys, stainless steel, welding wire, etc.
Tungsten carbide wire drawing dies enable wire manufacturers to maintain uniform wire roundness, minimizing material usage and the possibility of bursting.
Carbide mold is an excellent choice for manufacturing ferrous metal rod size wires. They are also ideal for short trial runs. Mirror polishing and smooth lead wire is used to ensure the long service life and wire drawing.
Features
1. Tungsten carbide wire drawing dies/mold pellets are made from 100% virgin material of WC and Co. It has good wear resistance, high bending strength.
2. Tungsten carbide wire drawing dies are a good economical choice for steel wire and other large-size wire drawing applications.
3. Applications for drawing wire, tubes, rod. Type as S11, WTA. S13 etc.
4. Usage: for steel wire drawing, drawing aluminum wire, copper wire drawing.
After the mask machine is equipped with the web guide system, the production speed can be increased to 500 pieces/minute, and the N95 (KN95) mask machine can be increased to 3000 pieces/minute. It can perform differential and swing by tracking the edge of the working coil materials. It supports EPC which is the abbreviation of edge position control and LPC, the abbreviation of line position control, with ultra-thin melt-blown cloth custom sensors and adjustable tension.
The web guide machine uses a 940nm infrared emitter tube and imported silicon photocells to accurately detect the deviation of the melt-blown cloth. The drive system adopts low synchronization, frequency conversion speed regulation, stepping and servo motor drive. The stroke is strictly proportional to the offset of the coil materials. The servo motor drives the ball screw to precisely adjust the material deviation, and keep the edges and lines of coil materials at the designated position at any time The microcomputer digital controller provides accurate control for the various functions of the system. The machine adopts a full touch screen operation, which is simple and easy to use. The operation interface includes the languages of 8 countries, which is convenient to operate all over the world.
Professional Web Guide System Manufacturer - Arise Technology
Arise Technology, which is a professional manufacturer of the web guide system, is located in Chongqing, China, It is a high-tech enterprise specializing in the research and development, production, sales and service of high-tech industrial automation products. It focuses on the R&D and production of the web guiding system and tension control system with 15 years’ experience. Arise attaches importance to product quality, high technology and product innovation, and strives to provide advanced level products.
The products manufactured by Arise technology is simple to operate with high precision, good stability, a wide range of applications. They can track and correct the marking lines or edges of cardboard, film, aluminum foil, steel tape and other much more materials to ensure neat winding and slitting. They are widely used in packaging, film, printing, printing and dyeing, labeling, textile, steel, tire, battery and other more industries. With excellent quality products with innovative technology and professional service, the Arise web guiding products are sold all over the world and get a high reputation among customers.